| SIZE(DN) |
SIZE(Inch) |
Inner diameter
(Actual pipe size) |
| 15 |
1/2" |
12.7mm |
| 20 |
3/4" |
19.05mm |
| 25 |
1" |
25.4mm |
| 32 |
1 1/4" |
31.75mm |
| 40 |
1 1/2" |
38.1mm |
| 50 |
2" |
50.8mm |
ZheJiang JiangXin Copper Co., Ltd. has mainly formed five series of products: Copper capillary series, Copper pressfit series, AC copper pipe fittings, Valve, cards and thread brass fittings.
All the series of products not only meet the customer's requirements for the national standard
CJ/T-2000, the British standard
BS864-2, the American Standard
ASME B16.22-1995, the European standard
EN1254-2 , but also accept all kinds o
f customization based on the special needs.Our products are mainly used in refrigeration, water pipes and other pipeline fittings for the transmission of liquids and gases.
Product Overview
Why do we have confidence in ensuring product quality?
·Raw material control.
1. Each batch of raw materials must be supplied with qualification certificate and material element certificate. The unqualified raw materials will not be accepted after inspecting.
2. We will test the rough after the forging in the lab because of the change of the internal crystal.
3. Third times of stress need to be carried out. Because of the special use requirements of some products, such as the sealing product and the pressfit product, the material composition is tested for third times.
·Rigorous testing process.
The products of Jiangxin pipeline are certified by
ISO9001 international quality system certification and
AS 3688 Australia standard. The production process of raw materials inspection, raw material processing, annealing process, product quality inspection and finished packaging are strictly carried out according to Australian standards.
·Annealing process
Our annealing process is carried out strictly accordance with
Australian standards. It can greatly improve the corrosion resistance and dezine resistance.
·Quality control
The products will be strictly inspected in each stage, including pre-produce, mid-produce and last-produce.
Company Profile
Zhejiang Jiangxin copper pipeline Co., Ltd. Was established in 1990, located in the Ruanshi Industrial Park in Zhuji, Zhejiang province. The two section of the company covers an area of 20000 kilo metersand more than 200 employees. After 28 years of unremitting efforts with higher standards, the company has transformed from the original family workshop to a modern scale enterprise. The product line extends from the single copper refrigeration parts to a number of thousands of products, covering refrigeration, heating, machine fittings, water pipe fittings and valves etc. And strive to open up new areas and new channels to achieve the vision of pipe fittings leading enterprises
The company has formed five series of products: Copper capillary series, Copper pressfit series, AC copper pipe fittings, Valve, cards and thread brass fittings. All the series of product not only to meet the customer's requirements for the national standard CJ/T-2000, the British standard BS864-2, the American Standard ASME B16.22-1995, the European standard EN1254-2, but also to accept all kinds of non - standard fittings based on the special needs.
The products of Jiangxin pipeline are certified by ISO9001 international quality system certification and AS 3688 Australia standard. The production process of raw materials inspection, raw material processing, annealing process, product quality inspection and finished packaging are strictly carried out according to Australian standards. Under constant demands and improvements, Jiang Xin has achieved the forefront of the industry in the following aspects.
Annealing process is a important step in the processing of products. Better annealing process can greatly improve the durability and safety of products. Our annealing process is carried out in strict accordance with Australian standards, and the products are annealed at stages. Products and direct drinking water projects, so as to ensure the pure and health of drinking water.
The quality control in the production process. First: The rough is checked by the inspector. The staff will measure the accuracy according to the drawing, and all the testing tools are imported from Australia. Second: Inspectors carry out uninterrupted inspection of each product being produced. The packaging workshop tests the appearance and size of each product; Third, the final product is checked, each product size must conform to the AS3688 drawing standard, and the quality inspection personnel record the product data of the test. In addition, for products that need to be tested for pressure, the inspectors will be able to test the airtightness or water tightness of each product professionally to ensure that each product reaches the pressure standard.
Finally, in the packaging, especially in the export, we use a more solid packaging, we use small boxes to pack the products, and then put small boxes in large boxes, double packing to ensure the safety of the product, reduce the transport process damage to the product.
The attitude determines the height, the details determine the success or failure, the above is the summary of the high standard of our production process, not only in the process, in the enterprise staff management, equipment management, warehousing logistics, financial accounting, office environment and other aspects of the high standards of their own. With the continuous self demand and promotion, our product quality will also give customers the perfect use of experience, to help customers win honor and reputation in the market, to realize the vision of the leading enterprise in the field of pipeline fittings.
){kind=link}