Dzr Brass Thread Fittings Nipple M*M NPT Taper

• Customization: Available
• After-sales Service: 2 Years
• Connection: Male
• Model NO.: JX026
• Head Code: Hexagon
• Thread Distribution: Internal Thread
• Surface: Sand Blast
• Material: Copper
• Technics: Forged
• Application: Water Pipe
• Customized: Customized
• Certification: Watermark
• Warranty: 5 Years
• Certain Using 1: Plumbing
• Certain Using 2: Copper Pipe Connection
• Classification: Brass Fitting
• Connection Term: Thread
• Specification 1: Brass Socket
• Specification 2: Brass Adapter
• Specification 3: Brass Nipple
• Specification 4: Brass Bushing
• Specification 5: Brass Union
• Specification 6: Brass Elbow
• Specification 7: Brass Tee
• Specification 8: Brass Valve
• Specification 9: Brass Nut
• Specification 10: Brass Connecter
• Using: Refrigeration
• Transport Package: Box
• Specification: 300*300*400
• Trademark: JHN
• Origin: Zhejiang China
• HS Code: 3322960948
• Production Capacity: 20000PCS/Months
• Package Size: 10.00cm * 8.00cm * 10.00cm
• Package Gross Weight: 0.065kg

Product Description

 

Specification

 

Decription	specification	size(min)	Size(max)
Nipple equal	Mi*Mi	1/8	3"
Nipple reduced	Mi*Mi	1/8	3"
Adapter equal	Fi*Fi	1/4	3"
Adapter reduced	Fi*Fi	1/4	3"
Adapter	Mi*Fi	1/4	3"
Socket equal	Mi*C	1/4	3"
Socket reduced	Fi*C	1/4	3"
Socket equal	C*C	1/4	3"
Bushings	Mi*Fi	1/8	3"

 

Product Description

 

In the production process, we not only adopt better annealing process, but also have strict quality control. First: the inspector inspects the blank. Second: the inspector carries out continuous inspection of each product in production. Third, check the final product in addition, for products that need to be pressure tested, the inspector will be able to professionally test the air tightness or watertightness of each product to ensure that each product meets the pressure standard. 
Finally, in terms of packaging, especially in export, we use stronger packaging, we use small boxes to pack the products, and then put the small boxes in big boxes and double-layer packaging to ensure the safety of the products and reduce the damage to the products during transportation.














 

Company Profile

 

zhejiang Jiangxin copper pipeline Co., Ltd. Was established in 1990, located in the Ruanshi Industrial Park in Zhuji, Zhejiang province. The two section of the company covers an area of 20000 kilo metersand more than 200 employees. After 28 years of unremitting efforts with higher standards, the company has transformed from the original family workshop to a modern scale enterprise. The product line extends from the single copper refrigeration parts to a number of thousands of products, covering refrigeration, heating, machine fittings, water pipe fittings and valves etc. And strive to open up new areas and new channels to achieve the vision of pipe fittings leading enterprises

The company has formed five series of products: Copper capillary series, Copper pressfit series, AC copper pipe fittings, Valve, cards and thread brass fittings. All the series of product not only to meet the customer's requirements for the national standard CJ/T-2000, the British standard BS864-2, the American Standard ASME B16.22-1995, the European standard EN1254-2, but also to accept all kinds of non - standard fittings based on the special needs.

The products of Jiangxin pipeline are certified by ISO9001 international quality system certification and AS 3688 Australia standard. The production process of raw materials inspection, raw material processing, annealing process, product quality inspection and finished packaging are strictly carried out according to Australian standards. Under constant demands and improvements, Jiang Xin has achieved the forefront of the industry in the following aspects.

Annealing process is a important step in the processing of products. Better annealing process can greatly improve the durability and safety of products. Our annealing process is carried out in strict accordance with Australian standards, and the products are annealed at stages. Products and direct drinking water projects, so as to ensure the pure and health of drinking water.

The quality control in the production process. First: The rough is checked by the inspector. The staff will measure the accuracy according to the drawing, and all the testing tools are imported from Australia. Second: Inspectors carry out uninterrupted inspection of each product being produced. The packaging workshop tests the appearance and size of each product; Third, the final product is checked, each product size must conform to the AS3688 drawing standard, and the quality inspection personnel record the product data of the test. In addition, for products that need to be tested for pressure, the inspectors will be able to test the airtightness or water tightness of each product professionally to ensure that each product reaches the pressure standard.

Finally, in the packaging, especially in the export, we use a more solid packaging, we use small boxes to pack the products, and then put small boxes in large boxes, double packing to ensure the safety of the product, reduce the transport process damage to the product.

The attitude determines the height, the details determine the success or failure, the above is the summary of the high standard of our production process, not only in the process, in the enterprise staff management, equipment management, warehousing logistics, financial accounting, office environment and other aspects of the high standards of their own. With the continuous self demand and promotion, our product quality will also give customers the perfect use of experience, to help customers win honor and reputation in the market, to realize the vision of the leading enterprise in the field of pipeline fittings.